Thermo Scientific E-pure 1090 Series User Manual page 3

Preface
Contains Parts and Assemblies
Susceptible to Damage by
Electrostatic Discharge (ESD)
Important Read this instruction manual. Failure to read, understand and follow the instructions in this manual
may result in damage to the unit, injury to operating personnel, and poor equipment performance.
Caution All internal adjustments and maintenance must be performed by qualified service personnel.
Intended Use
The Thermo Scientific Branstead Ultrapure Water Systems are laboratory systems and are used for treatment of
water. The E-pure is designed to produce Type 1 reagent grade water equal to or exceeding standards established
by ASTM, CAP and NCCLS.
The Thermo Scientific Branstead Ultrapure Water Systems are designed to be installed and used in the following
application areas:
• Laboratories for cell biological and biotechnological work with the safety levels L1, L2 and L3.
Unintended use
The system must not be operated outside of the specifications as described in the operating manual. In
particular, the system may not be used for production of drinking water and drugs manufacturing. The system
must not be used as a medical device and outside of laboratories.
Material in this manual is for information purposes only. The contents and the product it describes are subject
to change without notice. Thermo Fisher Scientific makes no representations or warranties with respect to this
manual. In no event shall Thermo be held liable for any damages, direct or incidental, arising out of or related to
the use of this manual.
©2019 Thermo Fisher Scientific. All rights reserved.
ii E-pure® Water Purification
CAUTION
s
s
Thermo Scientific