Calibration - Thermo Scientific E-pure 1090 Series User Manual

Section 6
Operation

Calibration

6-8 E-pure® Water Purification
The E-pure system comes calibrated from the factory. If calibration is
necessary, it is recommended to have authorized service personal to
conduct the calibration.
Required equipment for calibration:
1. External calibrated conductivity meter and sensor for ultrapure water
with a flow through cell
2. Calibrated temperature thermometer.
In Main Menu, select Calibration and follow the instructions below:
• Select Calibration: For all sensor and temperature calibration
functions in the system. Only authorized personal should access this
menu.
Thermo Scientific