Safety Information - Thermo Scientific E-pure 1090 Series User Manual

Thermo Scientific

Safety Information

Section 1
Your Thermo Scientific E-pure® Water Purification unit has been designed
with function, reliability, and safety in mind. It is the user's responsibility
to install it in conformance with local electrical codes. For safe operation,
pay attention to Notes, Cautions, and Warnings throughout the manual.
Water purification technology employs one or more of the following:
chemicals, electrical devices, mercury vapor lamps, steam and heated
vessels. Care should be taken when installing, operating or servicing
Thermo Scientific products. The specific safety notes pertinent to this
product are listed below.
Warnings
To avoid electrical shock, always:
1. Use a properly grounded electrical outlet of correct voltage and current
handling capacity.
2. Ensure that the equipment is connected to electrical service according
to local and national electrical codes. Failure to properly connect may
create a fire or shock hazard.
4. Do not mount your E-pure directly over equipment that requires
electrical service. Routine maintenance of this unit may involve water
spillage and subsequent electrical shock hazard, if improperly located.
5. For continued protection against possible hazard, replace fuses with the
same type and rating of fuse.
5. Disconnect power supply from equipment prior to servicing.
E-pure® Water Purification 1-1