Mechanical Disassembly
Mechanical disassembly should be made by following
Screws Expression
procedures chart.
(Type Diameter x Length) mm
Following steps show the basic procedures, therefore
T
M
unnecessary step may be ignored.
Caution:
The parts and screws, and the wiring method of the leads
and ferrite cores should be placed exactly the same
position as the original otherwise it may cause loss of
performance and product safety.
1.Top Cabinet and Lamp Cover removal
1. Loosen 1 screw A(T3X9) to remove the lamp cover.
2. Remove 1 screw B(T3X8) and 7 screws C(M3X8)to remove the top cabinet.
B
Lamp Cover
A
Top cabinet
C
C
C
C
C
C
C
-12-