Eiki LC-XNS2600 Service Manual page 17

5-1.Duct and Fans removal
LC-XNS3100/LC-WNS3200
1. Remove 2 screws A (T3x8) and screw B (T3x10) to remove lamp cooling fan.
2. Remove 2 screws C (T3x8) to remove LCD panel cooling duct(top).
3. Remove 2 screws D (T3x12) to remove the cooling fan for green panel.
4. Remove 2 screws E (T3x12) to remove the cooling fan for red panel and blue panel.
5. Remove 1 screw F (T3x8) to remove temperature sensor board.
Lamp duct
(button)
LC-XNS2600
1. Remove 2 screws A (T3x8) to remove the bottom duct and the duct shield.
2. Remove 2 screws B (T3x12) to remove lamp cooling fan.
3. Remove 2 screws C (T3x12) to remove the LCD panel cooling fans.
4. Remove screw D(T3x8) to remove the temperature sensor board.
LCD panel cooling fan
LCD panel cooling fan
Lamp duct(top)
A
Cooling fan
B
(Red panel)
Shield
Lamp
cooling
fan
A
C
D
C
D
E
F
E
A
Duct shield
B
C
B
Lamp cooling fan
Temperature sensor board
-17-
Mechanical Disassembly
C
LCD panel duct(top)
Cooling fan
(Blue panel)
D
Cooling fan
(Green panel)
Temperature sensor board