Mechanical Disassembly - Eiki EK-350 Series Service Manual

Mechanical disassembly

Remove the mechanical groups according to the following procedure.
The following steps are the basic processes and some unnecessary
steps may be ignored.
Note:
Please return parts and screws where it belongs, as it

may influence the projector's performance and security.
1.Top cover disassembly
2. Filter cover component disassembly
3. Main board component disassembly
4. Terminal sheet / Main board / Main board shield disassembly
5. Speaker and LCD duct disassembly
6. HLD light source and duct disassembly
7. Optical engine duct components / Optical engine disassembly
8. Duct components and filter bracket component disassembly
9. Bottom case disassembly
Tapping screw-T
-14-
Screw Description
(Type D x L) mm
Mechanical screw-M