Eiki LC-XNS2600 Service Manual page 8

Maintenance and cleaning
Clean the project lens
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains non-abrasive camera lens cleaner, or use a lens
cleaning paper or commercially available air blower to
clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of lens.
Clean the cabinet
Unplug the AC power cord before cleaning.
Gently wipe the projector surface with a soft dry cleaning
cloth. When the cabinet is heavily soiled, use a small
amount of mild detergent and finish with a soft dry
cleaning cloth. Avoid using an excessive amount of
cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the cabinet.
When the projector is not in use, put the projector in a
pouch to protect it from dust and scratches.
-8-