Electrical adjustment
Service adjustment menu operation
Enter service menu
Press and hold MENU and button, service mode menu will appear on screen.
Adjustment mode
Press MEMU button to select the group and itme, and then press or button to adjust the data.
Exit service mode
Press POWER button to exit the menu.
Remote control
Circuit adjustment
CAUTION:
The each circuit has been made by the fine adjustment at factory. Do not attempt to adjust the following adjustments
except requiring the readjustments in servicing otherwise it may cause loss of performance and product safety.
Before taking these adjustments, turn the projector for more than 10 minutes to stabilize
the operation.
WARNING :
USE UV RADIATION EYE AND SKIN
PROTECTION DURING SERVICING.
CAUTION:
To prevent suffer of UV radiation, those
adjustments must be completed within 25
minutes.
Control panel
-29-