Seco SBC-984 User Manual page 36

Single board computer with nxp i.mx6 processor

4.2.3 Cabled RTC battery.

As stated in paragraph 0, for the occurrences when the module is not powered with an external power supply, it is possible to connect a

cabled coin 3V Lithium Battery to supply the Real Time Clock embedded inside i.MX6 Processor.

SECO can provide for an optional cabled RTC battery, which is a CR2032 coin cell battery, 3V 230mAh, with a 30mm long connecting

cable.

Please contact SECO for ordering p/n.

4.2.4 CSI Dongle Camera VA09

This optional module offer the possibility of connecting a commercial camera module, which is KLT Auto-Focus 5MP Camera module JAL-

2721, based on the image sensor OV5640 manufactured by Omnivision Technologies, Inc.

Such a commercial camera module is perfectly integrated in the module VA09, which also includes a 15cm, 16-poles FFC cable

necessary to connect the module to SBC-984 (connector CN11).

By using this combined camera module, it will be possible to capture images with a resolution up to 2592x1944 at a frame rate of 15fps

(FullHD at 30fps), and many other advanced features.

More info about the camera CMOS Sensor can be found at

More info about the camera module is available at http://www.kailaptech.com/product.aspx?id=832&l1=512.

Please contact SECO for ordering p/n.

4.2.5 Accessories kit CABKIT984REVC

SBC-984

http://www.ovt.com/products/sensor.php?id=93.

This accessories kit includes the following items

RS-232 programming kit ASK-825REVB

Cabled RTC battery

DB-9 male adapter cable, for the connection of RS-232 compatible peripherals / PCs to board's connector J5

CAN adapter cable with DB-9 male connector, for the connection of the board to a CAN Bus using dedicated connector

J6.

Power button, reset button, Line Out jack, Mic in Jack adapter cable, can be connected to board's connector J11.