Advertisement
3.1 Introduction
On SBC-984 board, there are several connectors located on the upper plane. Standard connectors are placed on the same side of PCB, so that it is possible to
place them on a panel of an eventual enclosure.
Please be aware that, depending on the configuration purchased, the appearance of the board could be slightly different from the following pictures.
TOP SIDE
USB
Debug UART
+ I2C Touch
Screen
Power In
internal
connector
Serial Port
RS-232
MFG + Audio
+ power /
reset buttons
Camera
Power Jack
HDMI
Interface
SBC-984
SBC-984 User Manual - Rev. First Edition: 1.0 - Last Edition: 4.0 - Author: S.B. - Reviewed by N.P. Copyright © 2016 SECO S.r.l.
Recovery
Jumper
LVDS
Battery Holder
CAN
Gigabit
USB OTG
Dual USB
Ethernet
BOTTOM SIDE
Internal USB
Half-mini PCI-e
header
/ mSATA slot
21
Advertisement
