Fujitsu ETERNUS DX8100 S3 Site Planning Manual page 15

1. ETERNUS DX Installation
Installation Specifications
Item
Environmental condi-
tions
Vibration limit
Noise emission (*6)
*1: For power distribution units, there are multiple types of exteriors. For details, refer to
Optional Power Supply Products" (page
*2: These values are for product ID ETSPDHU / ETSPDHU-L.
*3: These values are for product ID ETSPDJU / ETSPDJU-L.
*4: These values are for product ID ETSPDVU / ETSPDVU-L.
*5: These are values for when 24 drives are installed in a 2.5" type drive or when 12 drives are installed in a
3.5" type drive.
*6: These values are measured when a single frontend enclosure, two controller enclosures, and four drive en-
closures are configured in an environment in which the temperature is 23 ± 2 °C at 0 meters above sea
level.
FUJITSU Storage ETERNUS DX8100 S3/DX8700 S3/DX8900 S3 Hybrid Storage Systems Site Planning Guide
Temperature Operating
Not operating
Shipping
Temperature gradient
Humidity Operating
Not operating
Shipping
Humidity gradient
Maximum wet bulb temperature
Altitude above sea level
Airborne dust
Gas concentration tolerance level
Oil vapor
Seawater (salt corrosion)
Operating
Not operating
Sound pressure level
Sound power level
39).
15
Copyright 2020 FUJITSU LIMITED
ETERNUS DX8900 S3
10 – 35°C
0 – 50°C
-25 – 60°C
15°C/h or less
20 – 80%RH
8 – 80%RH
8 – 90%RH
30%/d or less
29°C
0 – 3,000m
3
0.15mg/m or less
Cl : 3.4ppb or less, H S: 7.1ppb or less,
2 2
SO : 37ppb or less, NH : 420ppb or less,
2 3
NO : 52ppb or less, O : 5ppb or less,
2 3
HCl: 6.6ppb or less, HF: 3.6ppb or less
3
0.2mg/m or less
If the ETERNUS DX is installed on the ocean or
premises within 0.5km from the coast, necessary
measures must be taken to prevent salt corro-
sion.
400gal
1,000gal
60dB (A)
7.7B
"Specifications for
P3AM-9422-13ENZ0