2.
Rack Installation Specifications
Rack Installation Requirements
■
Connection Example (ETERNUS DX8100 S3)
The following figure shows an example when one controller enclosure and four drive enclosures (2U) are instal-
led in a rack.
For the ETERNUS DX8100 S3, the required length of cable is the same for Controller 0 (CM#0) and Controller 1
(CM#1) so the cables that are supplied as standard can be use for connections.
Figure 51 Backend Cable Connection Example (ETERNUS DX8100 S3 Connections in the Same Rack)
Base rack (rear)
Cables that are supplied as standard
1.1m
FUJITSU Storage ETERNUS DX8100 S3/DX8700 S3/DX8900 S3 Hybrid Storage Systems Site Planning Guide
DE
DE
DE
DE
CE
PDU#1
PDU#0
SCCI / PPC
PPC
Copyright 2020 FUJITSU LIMITED
75
P3AM-9422-13ENZ0