sparkfun Simon Tilts Series Assembly Manual page 14

Page 14 of 20
Locate the tilt arm positions on the PCB. Note, there are dashed lines
indicating the outline of the tilt arm. This shows you which direction the tilt
arm should face:
When you snap them into place, ensure that they are flush with the PCB:
With all three in place, it should look like this:
You're very close now! Just snap the batteries in and turn it on! Ensure you
correctly align the "+" and "-" sides of each battery:
How to Play the Game
Before you begin playing with your Simon Tilts, it is important to understand
this one major concept:
Simon Tilts is essentially the same game as Simon Says, except for one
major difference: each time you rotate a particular LED upward, it is the
equivalent of pressing the colored button on the Simon Says classic.
How to Play