®
Intel Pentium
II Processor Installation
Installing the Retention Mechanism
The 686IPK package includes a Retention Mechanism. The Retention
Mechanism is used to hold an Intel Pentium
Slot 1 connector. Make sure the system board is on a workbench (not
in a chassis). To install the Retention Mechanism, follow the steps be-
low.
1. The Retention Mechanism package includes a Retention Mecha-
nism and two Retention Mechanism Attach Mounts.
2. Insert the Retention Mechanism Attach Mount through the holes,
up from the bottom of the system board. The holes are located near
the ends of the Intel
18
®
II processor to the Intel
®
Slot 1 connector.
®