Table of Contents
Advertisement
Integrated Peripherals
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
On-chip Primary PCI IDE
On-chip Secondary PCI IDE
PCI Slot IDE 2nd Channel
USB Controller
KBC Input Clock
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
Onboard IR Controller
IDE HDD Block Mode
The IDE HDD uses the block mode. The system BIOS will
Enabled
check the hard disk drive for the maximum block size the
system can transfer. The block size will depend on the type
of hard disk drive.
The IDE HDD uses the standard mode.
Disabled
IDE Primary Master/Slave PIO and IDE Secondary Master/Slave
PIO
Your system supports five modes, 0 (default) to 4, which primarily differ
in timing. When Auto is selected, the BIOS will select the best available
mode after checking the hard drive.
The BIOS will automatically set the system according to your
Auto
hard disk drive' s timing.
0-4
You can select a mode that matches your hard disk drive' s
timing. Caution: Do not use the wrong setting or you will
have drive errors.
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled
Onboard Parallel Port
: Auto
Parallel Port Mode
: Auto
: Auto
: Auto
Modem Ring-on
: Enabled
: Enabled
: Disabled
: Disabled
: 12MHz
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
ESC
: Quit
: Disabled
F1
: Help
PU/PD/+/-
F5
: Old Values
(Shift) F2
F6
: Load BIOS Defaults
F7
: Load Setup Defaults
: 378/IRQ7
: SPP
: Disabled
↑ ↓ → ←
: Select Item
: Modify
: Color
55
Advertisement
Table of Contents
