Table of Contents
Advertisement
IRQ3 to IRQ15 (Wake Up Events in Doze and Standby, and
Power Down and Resume Events)
These are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a
mode. In effect, the system remains alert for anything which occurs to a
device which is configured as On, even when the system is in a power
saving mode.
When an I/O device wants to gain the attention of the operating system,
it signals this by causing an IRQ to occur. When the operating system
is ready to respond to the request, it interrupts itself and performs the
service. When set to On, the activity will neither prevent the system
from going into a power saving mode nor awaken it.
PNP/PCI Configuration
This section describes configuring the PCI bus system. It covers some
very technical items and it is strongly recommended that only experi-
enced users should make any changes to the default settings.
Resources Controlled By
Reset Configuration Data
52
ROM PCI/ISA BIOS
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
PCI IRQ Actived By
: Auto
PCI IDE IRQ Map To
: Disabled
Primary IDE INT#
Secondary IDE INT#
Assign IRQ for VGA
ESC
: Quit
F1
: Help
F5
: Old Values
F6
: Load BIOS Defaults
F7
: Load Setup Defaults
: Level
: PCI-Auto
: A
: B
: Enable
↑ ↓ → ←
: Select Item
PU/PD/+/-
: Modify
(Shift) F2
: Color
Advertisement
Table of Contents
