General Information; Introduction; Specifications - Pace HW 100 HeatWise Operation And Maintenance Manual

General Information

Introduction

Thank you for purchasing the HW 100 and/or the TW 100 system. This manual will provide you with
the information necessary to properly set up, operate, and maintain your new system. The HW 100 &
TW 100 systems are available in either 115 VAC or 230 VAC versions, which incorporate a highly
responsive, closed loop control system providing up to 55 Watts of total output power. The 230 VAC
version system bears the CE Conformity Marking, which assures the user that it conforms to EMC
89/336/EEC.
The 115 VAC version systems conform to FCC Emission Control Standard, Title 47, Subpart B, Class
A. This standard is designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.

Specifications

Specification
Power
Requirements
Dimensions
Tip & Tool Stand
Dimensions
Weight
TD 100 Handpiece
Weight
Tip to Ground
Resistance
Temperature
Stability
Absolute
Temperature
Accuracy
Heat
Level/Temperature
Range
©2004 PACE Inc., Annapolis Junction, Maryland
All Rights Reserved
HW 100
97-127 VAC 50/60 Hz, 80 W Max
or
197-253 VAC 50/60 Hz, 80 W Max
184mm H x 107mm W x 122mm D
(7.25" H x 4.2" W x 4.8" D)
71mm H x 88mm W x 195 mm D
(2.8" H x 3.5" W x 7.7" D)
1.6 Kgs (3.5 lbs)
88.2 g (3.1 oz)
< 2 Ohms
Within +/- 5 °C (9 °F), idle tip
temperature
N/A
260 °C - 454 °C (500 °F – 850 °F)
Available Power Module Heat Levels:
5, 5.5, 6, 6.5, 7, 7.5, 8, & 8.5
TW 100
97-127 VAC 50/60 Hz, 80 W Max
or
197-253 VAC 50/60 Hz, 80 W Max
184mm H x 107mm W x 122mm D
(7.25" H x 4.2" W x 4.8" D)
71mm H x 88mm W x 195 mm D
(2.8" H x 3.5" W x 7.7" D)
1.6 Kgs (3.5 lbs)
88.2 g (3.1 oz)
< 2 Ohms
Within +/- 5 °C (9 °F), idle tip
temperature
Within +/- 15 °C (27 °F)
260 °C - 454 °C (500 °F – 850 °F)
Page 3 of 17