Table of Contents
Advertisement
A configuration page similar to the following should load:
For proper operation the following parameters must be configured:
• 1090ES Transmit
• Receiver Mode
• ICAO Address (hex)
• Call Sign
• If FLARM fitted: Enter FLARM ID
(hex). Select FLARM filter
• If transmitting ADS-B:Select
ADS-B Ownship filter
• Emitter Category
• VFR Squawk (7000 UK - 1200
Australia)
After configuration of your parameters click on "Apply" to save.
UAV-1002156-001
ECCN 7A994
REV I
• ADS-B In Capability: Select
1090ES
• Air/Ground Threshold Speed
(V
)
S0
• Aircraft Length
• Aircraft Width
• Lateral GPS Offset
• Longitudinal GPS Offset
Page
20 | 37
Advertisement
Table of Contents
