Table of Contents
Advertisement
5.1.3 Other Locations
At the time of publishing of this revision, portable ADS-B OUT transmitters
are not permitted in any other location other than the UK and Australia,
including the United States. If operating SkyEcho outside of the UK or
Australia, the transmit function must be disabled using the configuration
settings. SkyEcho can be used as a receiver in all locations.
5.2 Features
The SkyEcho performs the following functions:
• 1090ES ADS-B 1090MHz reception
o Receives ADS-B IN data from aircraft equipped with 1090 MHz
Extended Squitter transmitters.
• 978MHz UAT reception (Selectable Option)
o Receives ADS-B IN data from aircraft equipped with 978 MHz
UAT transmitters. Receives Flight Information Services -
Broadcast (FIS-B) and Traffic Information Services - Broadcast
(TIS-B) compliant with UAT where available.
• FLARM® Receiver (Selectable Option)
o Customers in Europe with participating Electronic Flight Bag
(EFB) applications, have the option to choose FLARM reception
capability. With this feature, the EFB will present the location of
FLARM equipped aircraft on the moving map. This option
requires a FLARM license acquired through the EFB application
used.
▪ For a list of compatible EFB's, visit
• 1090ES transmission (1090 MHz)
o Transmits ADS-B Out data on the 1090 MHz frequency.
o Transmission may be enabled or disabled by configuration
• SBAS GPS reception
o High precision SBAS GPS meeting performance requirements
of TSO-C199, transmitting a Source Integrity Level (SIL) value
UAV-1002156-001
ECCN 7A994
REV I
https://uavionix.com/products/skyecho/
Page
10 | 37
Advertisement
Table of Contents
