Regulatory Compliance; Caa Cap 1391 Declaration; Casa Cao 20.18 Statement Of Compliance - uAvionix SkyEcho Installation And Pilot's Manual

Hide thumbs Also See for SkyEcho:

Table of Contents

5.3 Regulatory Compliance

SkyEcho meets the Minimum Operational Performance Standards of DO-

260B Class A0 with the output power limited to 20W and the SBAS GNSS

receiver meets the performance requirements of TSO-C199.

An EC device that operates using ADS-B at 1090MHz must have a

Declaration of Capability and Conformance (DoCC) from the manufacturer

before you can legally use it on board an aircraft. The pilot in command of

the aircraft is responsible for ensuring that the EC device has a valid

declaration. Please refer to the CAA EC Web page for more information:

https://www.caa.co.uk/General-aviation/Aircraft-ownership-and-maintenance/Electronic-

Conspicuity-devices/

Reference number

UK.CAA.DoCC.000007

An EC device must have a statement of compliance from the EC device

manufacturer certifying that the device meets the requirements 1 to 5 of

CAO20:18 Part B Appendix XIV before you can legally use it on board an

aircraft. The pilot in command of the aircraft is responsible for ensuring that

the EC device has a valid declaration and that the declaration is carried on

board.

SkyEcho meets the requirements of 1 to 5 of CAO20:18 Part B Appendix

XIV. Since SkyEcho contains an internal pressure altitude sensor, if used

within a pressurized cockpit, the transmitted pressure altitude may be

erroneous and may not comply with CASA standards and deviation

requirements. For this reason, SkyEcho should be used only in

unpressurized aircraft when the transmit function is enabled.

UAV-1002156-001

ECCN 7A994

REV I

Issue number

Manufacturer

Issue 0

uAvionix Inc

Type number