Analog Devices ADZS-21569-EZKIT Manual page 31

Table 3-12: GPIO LEDs
Reference Designator
LED7
LED9
LED10
Reset ( LED11 )
When ON (red), it indicates that the board is in reset. A master reset is asserted by pressing SW2 , which activates
the LED. For more information, see
Connectors
This section describes connector functionality and provides information about mating connectors. The connector
locations are shown in the Connector Locations figure.
Figure 3-9: Connector Locations
Connectors on the back of the board are noted with dotted lines.
NOTE:
S/PDIF Optical Tx ( J1 )
Part Description
Fiber optic transmitter
Standard TOSLINK optical digital cable
ADZS-21569-EZKIT Manual
Programmable Flag Pin
PB_03
DAI0_PIN08
DAI0_PIN11
Reset Pushbutton ( SW2
Manufacturer
Everlight
Mating Cable
).
Part Number
PLT133/T10W
LEDs
3–15