Analog Devices ADZS-21569-EZKIT Manual page 15

• FTDI's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB
driver development in most cases.
• Transmit and receive LED drive signals
• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
• FIFO receives and transmits buffers for high-data throughput
• Device supplied pre-programmed with unique USB serial number
• Supports bus powered, self-powered and high-power bus powered USB configurations
• Integrated +3.3V level converter for USB I/O
• Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic
• True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input
• Configurable I/O pin output drive strength
• Integrated power-on-reset circuit
• Fully-integrated AVCC supply filtering - no external filtering required.
• UART signal inversion option
• +3.3V (using external oscillator) to +5.25V (internal oscillator) single supply operation
• Low-operating and USB suspend current
• Low USB bandwidth consumption
• UHCI/OHCI/EHCI host controller compatible
• USB 2.0 full speed compatible
INA3221 - Triple Channel, High Measurement, Shunt and Bus
Voltage Monitor
The INA3221 is a three-channel, high-side current and bus voltage monitor with an I
interface. The INA3221 monitors both shunt voltage drops and bus supply voltages, in addition to having program-
mable conversion times and averaging modes for these signals. The INA3221 offers both critical and warning alerts
to detect multiple programmable out-of-range conditions for each channel.
IS25LP512M - 512M-bit Serial Flash Memory with Dual and
Quad SPI
The IS25LP512M and IS25WP512M Serial Flash memory offers a versatile storage solution with high flexibility
and performance in a simplified pin count package. ISSI's "Industry Standard Serial Interface" Flash is for systems
ADZS-21569-EZKIT Manual
INA3221 - Triple Channel, High Measurement, Shunt and Bus Voltage Monitor
2
C- and SMBUS-compatible
2–7