Siemens SIMATIC NET SPC 4-2 LF Manual page 2

Profibus controller
Table of Contents

Advertisement

Classification of Safety-Related Notices
This document contains notices which you should observe to ensure your own
personal safety, as well as to protect the product and connected equipment. These
notices are highlighted in the manual by a warning triangle and are marked as follows
according to the level of danger:
!
Danger
indicates that death, severe personal injury will result if proper precautions are not
taken.
Warning
!
indicates that death, severe personal injury can result if proper precautions are not
taken.
Caution
!
with a warning triangle indicates that minor personal injury can result if proper
precautions are not taken.
Caution
without a warning triangle indicates that damage to property can result if proper
precautions are not taken.
Notice:
indicates that an undesirable result or status can result if the relevant notice is
ignored.
Note
highlights important information on the product, using the product, or part of the
documentation that is of particular importance and that will be of benefit to the user.
Copyright © Siemens AG, 2001 bis 2006
Disclaimer
We have checked the contents of this manual for agreement with the hardware and software described. Since deviations cannot be precluded entirely, we cannot
guarantee full agreement. However, the data in this manual are reviewed regularly and any necessary corrections included in subsequent editions. Suggestions for
improvement are welcome.
Siemens AG
Automation and Drives
Industrial Communication
Postfach 4848, D-90327 Nürnberg
Siemens Aktiengesellschaft
C79000-G8976-C157-3
Technische Änderungen vorbehalten.
Printed in the Federal Republic of Germany
2

Advertisement

Table of Contents
loading

Table of Contents