Intel FALCON 8+ User Manual page 29

USER MANUAL
INTEL® FALCON™ 8+ UAS
Figure 2.10: Independent Camera Control (ICC) (continued)
8
10
7
5
The following table presents an overview of the function assignment:
Table 2.1: Operating a Camera by ICC
BUTTON
REFERENCED
ON ICC
(1) Start/Stop video
(2) Trigger photo
(3) View last image
(4) /
(5) Camera tilt (up/down)
Yaw (left/right)
(6) Camera tilt (up/down)
Yaw (left /right)
(7) Horizontal tilt (adjust camera
horizon) (left/right)
Exposure compensation +/- (up/
down)
(8) Shutter speed -
© 2018 Intel Corporation. All rights reserved
LOGITECH F310 gamepad
9
11
For using the LOGITECH F310 gamepad
as ICC it has to be connected to the CTR
via a USB port (USB port 2 – 4) like shown
4
and described above. The switch at the
3 1
bottom of the gamepad (
2
set to
6
If the LOGITECH F310 gamepad is used
for the first time with the CTR, a respec-
tive driver will be installed automatically.
During the installation the live preview
might get delayed. After the installation
the tablet must be rebooted.
SONY ALPHA 7R
.
X
CAMERA
INSPECTION-PAYLOAD
/
Trigger photo (both cameras)
/
Change color palette (when FLIR
is active)
Camera tilt (up/down)
Yaw (left/right)
Camera tilt (up/down)
Yaw (left/right)
Horizontal tilt (adjust camera
horizon) (left/right)
Switch camera (up/down)
Zoom + (when RGB camera is
active)
-- ) has to be
X D
29