Intel FALCON 8+ User Manual page 139

USER MANUAL
INTEL® FALCON™ 8+ UAS
Table 3.5: Operational guidelines in case of emergency (continued)
EVENT
The UAV flies outside (later-
ally or vertically) of the space
previously dedicated for the
flight.
© 2018 Intel Corporation. All rights reserved
POSSIBLE ACTION
Action 1 (before take-off)
Before you take off you can assure the UAV will stay
in the allocated space. You can limit the maximum
distance and height of the airspace the Intel Falcon
8+ UAV is flying in by setting specific values which
will not be exceeded by the UAV. The center of this
bounding box is set to the position of the UAV where
is activated.
Bounding Box
To set these boundaries from the Main Screen of the
Status Display (see "STATUS DISPLAY" on
page 166):
1. Push ENT in the Main Screen.
The menu is opened
2. Use the arrow RIGHT/LEFT buttons to select
.
Settings
3. Push ENT.
The menu is opened.
Settings
4. Use the arrow RIGHT/LEFT buttons to select
Bounding Box
5. Push ENT.
The respective menu is opened.
highlighted.
6. Push ENT.
The field behind
Radius
7. Use the arrow RIGHT/LEFT buttons to determine
the radius the UAV should fly in.
The radius can be set from 10 m to 1000 m.
8. Push ENT.
The value is stored.
9. Push the arrow RIGHT button one time to select
.
Height
10.Push ENT.
The field behind
Height
11.Use the arrow RIGHT/LEFT buttons to determine
the height the UAV should not exceed.
The height can be set from 10 m to 300 m.
12.Push ENT.
The value is stored.
.
Radius
is highlighted.
is highlighted.
Radius
is highlighted.
is highlighted.
Height
is
139