Intel FALCON 8+ User Manual page 104

USER MANUAL
INTEL® FALCON™ 8+ UAS
It is possible to store and edit individual waypoints (GPS position, height, camera
heading, and camera pitch angle) onto a USB stick, which is inserted into the CTR. A
waypoint can later be recalled, and the Intel® Falcon™ 8+ UAV will fly to this position
and take an image with the stored heading and pitch angle. Camera settings such as
shooting mode, or zoom, cannot be stored, and must be set manually before flight.
Multiple waypoints can be combined to create a path.
Figure 3.4: The Cockpit Control Application and PATH Projects
PATH PROJECT
Tapping on the
PATH
Here you can create, save, and load individual Paths projects (including the GPS posi-
tion, height, camera heading, and camera pitch angle).
Executing the PATH function via the touchscreen tablet:
Tapping on
New Project
integrated keyboard (see below)
Tapping on
Load Project
stored PATH project from a USB stick, which is inserted into the CTR.
Save project:
new or existing project. Tap on this button to save the actual PATH project to the
inserted USB stick.
Close project:
© 2018 Intel Corporation. All rights reserved
3
button in the main screen opens the window
opens the window
opens a window in which you can load an already
This button becomes active after creating a new, or modifying, a
Tap here to close the actual PATH project.
PATH PROJECT
PATH PROJECT - NEW
.
with an
104