Intel FALCON 8+ User Manual page 209

USER MANUAL
INTEL® FALCON™ 8+ UAS
Figure 6.7: Removing a payload adapter from a payload (continued)
The following figures show step by step instructions how a new payload adapter has to
be attached to a payload.
The payload adapter is delivered in pieces.
For the single parts of the payload adapter see "The parts of the payload adapter" on
page 208.
Figure 6.8: Attaching a new payload adapter
© 2018 Intel Corporation. All rights reserved
4. Remove the front plate from the payload rod.
5. Remove the back plate from the payload rod.
1. Attach the board to the back plate.
2. Attach the ball bearing to the front plate.
3. Slide the front plate assembly onto the rod of
the payload.
209