Intel FALCON 8+ User Manual page 145

USER MANUAL
INTEL® FALCON™ 8+ UAS
Table 3.6: Possible Warnings (continued)
SHOWN TEXT
Status Display:
NO BATTERY
REDUNDANCY
Tablet:
No battery
redundancy!
Status Display:
LINK WEAK!
Tablet:
Link weak!
Status Display:
LINK LOST!
Tablet:
Link lost!
Status Display:
GPS LOST!
Tablet:
GPS signal
lost!
Status Display:
MOTOR FAILURE!
Tablet:
Motor failure.
Land now!
Status Display:
JOYSTICK ERROR!
Tablet:
Joystick
error. Land now!
© 2018 Intel Corporation. All rights reserved
REASON
Only one instead of two
batteries is detected in
the UAV.
One of the two data link
connections has failed.
Data link connection is
lost.
The GPS signal quality is
not sufficient.
There is an error with a
motor, a motor control-
ler or the motor bus.
The calibration of the
control sticks failed, e.g.
because the user was
pushing a joystick
during turn-on or
because something is
actually broken.
SIGNALS / NOTES
This warning occurs only if
the motors are turned ON.
See as well "Battery warn-
ings of the UAV" on
page 149
Vibration on the CTR
Acoustic: "Link weak!"
Vibration on the CTR
Acoustic: "Link lost!"
Vibration on the CTR
Acoustic: "GPS lost!"
Vibration on the CTR
Acoustic: "Motor failure.
Land now!"
Vibration on the CTR
When the CTR is switched
ON, the joysticks are cali-
brated automatically.
Restart the CTR (take care
not to exert pressure on
any joystick) and see if the
warning is still active. If so,
the joystick electronics may
be broken. In this case
please get in touch with
Intel support.
145