Intel FALCON 8+ User Manual page 204

USER MANUAL
INTEL® FALCON™ 8+ UAS
Figure 6.3:
Removing a motor rail from an Intel Falcon F8+ UAV
Before mounting a motor rail, perform the following checks:
Figure 6.4:
Checks do be done before mounting a motor rail
© 2018 Intel Corporation. All rights reserved
6. Push the motor rail straight out of the
connecting plug of the rear cross tube.
1. On the Intel Falcon 8+ UAV, make sure the
golden pins of the cross tube connectors:
• show no wear
• are free of dirt
• are not bent.
2. Make sure the connecting plugs of the cross
tube are free of cracks and damages.
3. Make sure the thread bushings of the
connecting plugs of the cross tube are free of
damage.
4. On the replacement motor rail, make sure the
connectors of the motor speed controller:
• show no wear
• are free of cracks
• are free of dirt.
204
(continued)