Intel FALCON 8+ User Manual page 140

USER MANUAL
INTEL® FALCON™ 8+ UAS
Table 3.5: Operational guidelines in case of emergency (continued)
EVENT
© 2018 Intel Corporation. All rights reserved
POSSIBLE ACTION
13.Push the arrow RIGHT button one time to select
.
Activate
14.Push ENT.
The boundaries are activated. You return to the
Main Screen.
Action 2
Stay calm and fly back into the operating area. If nec-
essary switch to Height-Mode or Manual-Mode (see
"FLIGHT MODES" on page 120).
Action 3
Try to activate the
RETURN TO HOME
the CTR to bring the Intel Falcon 8+ UAV back to
where it took off by pushing the dedicated button on
the CTR (see "Intel® Cockpit Controller (CTR) Over-
view" on page 24).
Action 4
Switch off the CTR to activate the Link Loss Proce-
dure.
Before take-off you are forced to choose one of
three Link Loss Procedures to determine the auto-
matic landing in the unlikely event that both data
links are lost:
Direct landing
(minimum 20 m altitude or at its current
Straight
height if higher than 20 m) or
max. mission height).
For more information about the Link Loss Procedure
see "LINK LOSS PROCEDURE" on page 116).
Action 5
Force an intentional crash at an uncritical position.
All propellers will stop and the Intel Falcon 8+ UAV
will fall down.
To do so:
1. Switch to Manual-Mode.
2. Give full thrust down and simultaneously
3. Push the dedicated engine START/STOP button
on the CTR for about one second.
function from
,
ComeHome
(at
ComeHome High
140