1.
Clean the band as described in section 6.1 above.
2.
Open the INVU Sensor Band™ carrying case zipper and spread its
fabric wings.
The carrying case has circular cavities below the fabric wings.
These cavities are designed to accommodate the band
sensors.
NOTE
3.
Place the INVU Sensor Band™ center section in the carrying case,
verifying the band sensors are in the package cavities.
Figure 6-2. Band center section in carrying case
4.
Fold the right back strap inward, above the band center section.
Case
Cavities
Figure 6-3. Folding the back straps
37