Initiating A Monitoring Session - Nuvo INVU Quick User Manual

Referring to Figure 5-8, please note the following:
• The INVU Sensor Band™ should be fully attached to the skin of the
abdomen.
• The lateral units should be located on the sides as backward as
possible.
• The INVU by Nuvo™ logo is on the upper frontal strip of the INVU
Sensor Band™.
Step
MOVING TO THE MONITORING POSITION
6
Monitoring sessions are best performed in a comfortable relaxed position
while lying down on the back, sitting, or reclining in a quiet room.
Minimize your movements as much as possible during monitoring.
After moving to your monitoring position, verify that the band is
positioned properly; if not, please readjust it for optimal monitoring. To
tighten the band, unlock the front buckles and pull the front adjustment
straps until the belt is properly attached to the skin and is stable on the
abdomen.
5.2

Initiating a Monitoring Session

Your medical care team will prescribe the monitoring session duration
and the number of sessions that should be conducted. Starting a session
will only be possible during the clinic availability hours and when your
session appointment was scheduled.
A monitoring session will not be initiated unless you waited at
least 10 minutes from the end of your last monitoring session.
NOTE
31