Nuvo INVU Quick User Manual page 18

Indicator
Location
On/Off
power
button
(status LED)
Make sure that one of the indicator lights is lit at all times
during a monitoring session.
NOTE
The battery is integrated into the INVU Sensor Band™ Controller and is
charged by the medical-grade power supply through the USB type C
connector. The medical-grade power supply is supplied as part of the
INVU Sensor Band™ package.
• Charging time (from an empty battery to a fully charged battery) is
around two hours.
Under typical conditions, a fully charged battery will provide ~4.5
•
hours of continuous monitoring.
The INVU Sensor Band™ battery is pre-charged before
shipping. However, it is recommended recharging it before
first use to a fully charged battery.
NOTE
18
LED LED
Color Behavior
Steady
Green
Blinking
Steady
Blue
Blinking
Steady
Red
Blinking
State/Functionality
Power OFF – Battery charging
Power up
Power ON – Bluetooth connected
Power ON – In monitoring session
Power ON – Malfunction
Power ON –Low battery
(less than 20%)