Maintenance; Cleaning The Invu Sensor Band - Nuvo INVU Quick User Manual

6

Maintenance

This section describes how to maintain the INVU Sensor Band™.
6.1

Cleaning the INVU Sensor Band™

It is very important to clean the band immediately after completing a
monitoring session. Avoid accumulation and drying of gel on the band
and its sensors.
Step
RINSE DETACHABLE SENSORS
1
1. Detach the detachable sensors from their connectors.
Figure 6-1. Detaching the bio-potential sensors from the INVU sensor band™
2. Rinse the detached sensors with tap water until no residue of gel is
left in the sensor's cavity.
3. Let the detached sensors air-dry or use a dry lint-free cloth; then,
reattach the sensors to the band sockets (you should hear an
attaching click sound)
.
35