Nuvo INVU Quick User Manual page 32

Tips for a successful monitoring session!
Scrub your abdominal skin with soap and water before
applying the band.
Ensure the sensors are fully attached to your body all the time.
Make sure you are connected to a Wi-Fi network.
Start monitoring at a comfortable relaxed position: sitting,
reclining or laying on your back.
Minimize your movements as much as possible during
monitoring.
Pay attention to INVU™ App sounds and notifications
during the session.
Avoid initiating or answering phone calls or the use of any
highly consuming internet bandwidth applications of your
smartphone during the signal quality check and the
monitoring itself.
1. Turn the INVU Sensor Band™ ON by shortly pressing on the
Controller ON/OFF power button, located on the right side of the
INVU Sensor Band™.
Once the INVU sensor band™ is powered ON, wait until a steady green
light appears on the Controller (see section 3.2.1 for reference).
2. Verify your Bluetooth connectivity is enabled on your mobile device
and that you have access to the Internet. Internet access must be
available either via Wi-Fi (recommended) or a mobile phone data plan
(i.e., the cellular network).
32
Figure 5-9. INVU Sensor Band™ power button