Using The Invu Sensor Band; Applying The Invu Sensor Band - Nuvo INVU Quick User Manual

5 Using the INVU Sensor
Band™
5.1

Applying the INVU Sensor Band™

Step
1 ADJUSTING THE BAND TO YOUR SIZE
1. Unlock the front buckles and release the front and back straps.
2. Flip the band over. Note the top and bottom indicators. The INVU by
Nuvo™ logo should be at the top front of the strip.
Placing the INVU Sensor Band™ is done while standing up.
NOTE
3. Hold the band to your body, starting with the lower strap. Then do
the same with the upper strap.
Figure 5-1. Properly holding the INVU Sensor Band™
4. The plastic units should be placed on both sides of your body. Note
that all the sensors should be touching the skin.
26
Invu by Nuvo™
Logo on upper
strip