Repackaging The Invu Sensor Band - Nuvo INVU Quick User Manual

Step
4.
CLEAN INNER SIDE OF THE BAND
2
1. Clean the inner side of the band (the part facing the abdomen),
including the Acoustic sensors and the detachable sensor, with wet
wipes.
2. Clean the inner side of the band (the part facing the abdomen),
including the Acoustic sensors and the detachable sensor, with an
alcoholic based spray provided in the package.
3. Let the band parts air-dry for 10 min.
4. If the device does not appear to be clean at the end of this process,
repeat the process.
Every 3 weeks a more extensive cleaning process is required.
Please refer to the detailed INVU User Manual located on our
website for our full extensive cleaning process
NOTE
https://www.nuvocares.com/support.
Do not immerse the INVU Sensor Band™ in any liquid. If it is
accidentally immersed in liquid, do not power ON the unit.
Contact Nuvo Group customer support for assistance at
CAUTION
support@nuvocares.com or at 1-800-554-9041 (USA only).
INVU Sensor Band™ does NOT have any user-serviceable
parts. Do not open the Controller. Do not replace the battery.
In case of malfunction, contact Nuvo Group customer
CAUTION
support.
6.2

Repackaging the INVU Sensor Band™

To protect the INVU Sensor Band™ and keep it in good operational
conditions, repackage the INVU Sensor Band™ after using it and for
storage purposes.
36