Nuvo INVU Quick User Manual page 33

The INVU Sensor Band™ transfers data to the mobile application
via Bluetooth communication. You should be near your
mobile device at a distance that does not exceed 5 meters
NOTE
(about 16 feet), and there should be no walls in between.
Launch the INVU™ App and log in.
3.
4. press START. The application will connect to the device if it wasn't
previously connected.
A steady blue LED light on the controller indicates the band is
connected.
After the band is powered ON, you have fifteen minutes to
start a monitoring session. If a monitoring session does not
begin within five minutes, the INVU Sensor Band™ will turn
NOTE
itself Off Automatically.
5. Monitoring sessions are best performed in a comfortable position
while lying down on the back or sitting or reclining in a quiet room.
Minimize your movements as much as possible during
monitoring.
6. Press START to begin the monitoring session.
The monitoring session begins with a signal quality check. Follow the
session preparation instructions to ensure proper use of the device.
Figure 5-10. INVU Sensor Band™ Home Page start button
33