Connecting Via Qr Code Scan - Nuvo INVU Quick User Manual

Wi-Fi connection is recommended, connect via cellular only if
Wi-Fi isn't available.
NOTE
To enable Bluetooth connection on your device:
1. Go to "settings" on your mobile device.
2. Enable Bluetooth.
3. Enable Wi-Fi and verify there is a Wi-Fi connection.
Press Connect
after Bluetooth
and Wi-Fi are
enabled
The "Connect" button becomes active only after Bluetooth is
enabled.
4. Press Connect. The Scan QR Code screen appears.
4.5

Connecting via QR Code Scan

Before using the INVU Sensor Band™, the band and mobile device need
to be paired. Connecting the band is performed by scanning the INVU
Sensor Band™ QR code.
22
Figure 4-3. Enable Bluetooth and Wi-Fi