The INVU™ QR CODE SCAN screen appears.
3.
Point your mobile device camera at the QR code, located on the
plastic cover of the INVU Sensor Band™ controller.
Make sure the camera is focused on the QR code; if necessary, tap on
the screen to enable camera focusing on the QR code. Verify you have
sufficient lighting on the QR code to enable the scan and try avoiding light
reflections. Verify your camera is clean before scanning.
24
Band
QR
code
Figure 4-6. Band QR code
QR code
location
Figure 4-7. QR Code location
Back to
home
screen