Removing The Invu Sensor Band - Nuvo INVU Quick User Manual

A blue light on the band Controller blinks until the session
ends. This indicates the monitoring is working properly and
that data is transferring via the Bluetooth connection to your
NOTE
smartphone.
The session will stop automatically after reaching the duration prescribed
by your medical care team.
5.3

Removing the INVU Sensor Band™

1. Power OFF the band by a long press on the power button.
2. Open the back-buckle straps and hold each back strap in separate
hands.
3. Remove the band from your abdomen.
4. Properly clean the band (see section 6.1).
5. Store the INVU Sensor Band™ in its case (see section 6.2)
34
Figure 5-11. Opening the Belt