INTEGRA Metering AMFLO MAG Pro Mounting And Operating Instructions page 27

8 - Display
[Language= EN]
[D.rate=Hz 5]
[Contrast= 7]
[Net total= OFF]
[Currency= OFF]
[Curr.decim.= 2]
[EUR/dm+ 01.000]
[EUR/dm- 01.000]
[T+ reset]
[P+ reset]
[T- reset]
[P- reset]
10 - Diagnostic
[Self test]
[simulation= OFF]
[Firmware rev.]
11 - Internal data
[L2 keycode= 111111.]
[Load user pres.]
[Save user pres.]
[Hours= 00000]
[Zero= +00123]
AMFLO AMFLO MAG Pro MAG Pro
® ®
8.1 Choice of the language: EN= English, IT=Italian, FR= French, ES= Spanish, DE=German
8.2 Display update frequency: 1-2-5-10 Hz
8.3 Display contrast
8.4 Enable the page of net totalizer
8.5 Visualizes the values of the partial totalizer in the unit of selected currency
8.6 Choice of the numbers of decimals for the visualization currency value: From 0 to 3
8.7 Value of conversion/currency for direct totalizer
8.8 Value of conversion/currency for reverse totalizer
8.9 Total direct (positive) flow totalizer reset
8.10 Partial direct (positive) flow totalizer reset
8.11 Total reverse (negative) flow totalizer reset
8.12 Partial reverse (negative) flow totalizer reset
10.1* Automatic self test of converter
10.2* Flow rate simulation enabling
10.3 Firmware version
11.1 Level 2 access code enter (user choice and setting of access code if required)
11.2 Load user data saved
11.3 Save user data
11.4 Hours of working time
11.5 Internal value for zero calibration
27 27