Section 7
Operating procedures
IEC10000339 V2 EN-US
Figure 33: Auto-indication message
7.1.1.2
Monitoring alarm data
Active alarms are indicated by the alarm LEDs and the LED in the Multipage button. The alarms are
configured with PCM600. The alarm type and information depend on the application
configuration.
1.
Press
2.
Press
the three alarm pages.
3.
Press
alarm.
62
to open the alarm view.
or
to move between active alarms in the page, or press
to open a dialog box that shows more detailed information about the selected
© Copyright 2013 ABB. All rights reserved
1MRK 500 096-UUS B
GUID-CC3B2CC2-FCE1-4256-A83E-D27AF735C9C2 v3
to switch between
650 series
Operation manual