Monitoring The Ied Remotely; Controlling; Controlling Circuit Breakers And Disconnectors - ABB Relion 650 Series Operation Manual

Section 7
Operating procedures
7.1.4.1

Monitoring the IED remotely

Use the PCM600 tool to operate the IED remotely.
• Read maintenance record and version log.
• Analyze DFR data.
• Create DFR records.
• Monitor IED values.
7.2

Controlling

7.2.1

Controlling circuit breakers and disconnectors

The primary equipment can be controlled via the LHMI with the Open and Close buttons when the
IED is set to local control mode and the user is authorized to access control operations.
1. Select Main menu/Control/Single line diagram.
The SLD displays all controllable objects.
2.
Select an object with
Selection of object is indicated with a square border that moves when
Switch objects can have additional icons that present the switch object states.
3.
Press
ANSI12000007 V1 EN-US
Figure 41: Selecting an object
4.
Press
68
For more information, see PCM600 documentation.
or
Switch object is in substituted state.
Switch object is interlocked.
to open or to close the object.
ANSI12000007-1-en.vsd
to confirm the operation.
© Copyright 2013 ABB. All rights reserved
.
1MRK 500 096-UUS B
GUID-D1DA8B48-DA40-4E9D-9593-E699371EBBD7 v6
GUID-921AE9B2-0CA3-46E8-A52C-55E15D06A50A v4
and are used.
650 series
Operation manual