Resetting The Ied; Clearing And Acknowledging Via The Local Hmi - ABB Relion 650 Series Operation Manual

1MRK 500 096-UUS B
IEC10000340 V2 EN-US
Figure 42: Closing a circuit breaker
•
5.
Press
7.3

Resetting the IED

7.3.1

Clearing and acknowledging via the local HMI

Use the Clear button to reset, acknowledge or clear all messages and indications, including LEDs
and latched outputs as well as registers and recordings. Pressing the Clear button activates a view
for selecting the reset function. Events and alarms assigned to alarm LEDs can also be cleared
with the Clear button.
1.
Press
All the items that can be cleared are shown.
650 series
Operation manual
Press to cancel the operation.
or to move between single-line diagram pages.
The time between selecting the object and giving a control command is restricted
by an adjustable timeout [(set by the parameter
object is selected, the control command has to be given within this time.
to activate the Clear view.
© Copyright 2013 ABB. All rights reserved
Operating procedures
tSelect for each object)]. When an
GUID-9880CE57-79DE-4949-B9FA-1E91ED2F5F4B v3
Section 7
69