Editing String Values; Editing Enumerated Values; Changing Time Settings In Lhmi - ABB Relion 650 Series Operation Manual

1MRK 500 096-UUS B
IEC13000050 V1 EN-US
Figure 29: Restoring the previous value
5.1.12.2

Editing string values

1. Activate the setting mode and select a setting.
When editing string values, the cursor moves to the first character.
2.
Press
One press changes the value by one step.
3.
Press
•
•
5.1.12.3

Editing enumerated values

1. Activate the setting mode and select a setting.
When editing an enumerated value, the selected value is shown inverted.
2.
Press
One press changes the enumerated value by one step in the parameter specific order.
5.1.12.4

Changing time settings in LHMI

If there is a need to change the time setting in the LHMI (Main menu/Configuration/Time/System
time/SYSTEMTIME:1) the change will take affect immediately. To confirm the new setting press
. To remove the change, press
650 series
Operation manual
or to change the value of an active character.
or to move the cursor to another character.
To insert characters or space, press simultaneously
To delete characters, press simultaneously
PCM600 supports Unicode characters.
or to change the value of an active enumerated value.
© Copyright 2013 ABB. All rights reserved
IEC13000050-1-en.vsd
and
.
Using the HMI
and .
.
GUID-0EE1EA01-D75F-4F3E-825F-ACD59D5A160F v2
Section 5
AMU0600416 v7
AMU0600417 v5
53