Using Function Buttons - ABB Relion 650 Series Operation Manual

1MRK 500 096-UUS B
1.
Select Main menu/Configuration/HMI/Screen/SCREEN:1 and press
2.
Change the default view with
3.
Press
5.1.9

Using function buttons

The function buttons can be configured either as menu shortcuts or control buttons. The buttons
are functional only when the function button panel is visible.
1. Press any function button to open the function button panel.
On the first press of a button, the panel opens but no other action is taken.
GUID-11D6D98C-A2C9-4B2C-B5E0-FF7E308EC847 V1 EN-US
Figure 23: Function button panel
2. Press the wanted function button.
•
•
3.
Press
The panel is also closed after pressing a function button configured for a menu shortcut.
The function buttons are configured with PCM600.
650 series
Operation manual
to confirm the selection.
Press the wanted function button to jump to a certain menu item.
The menu opens immediately upon pressing the button.
Press the wanted function button for at least 0.5 s to initiate a control signal. The
action is taken once.
To repeat the action, press the button again. If the button is pressed less that 0.5 s, no
action is taken.
to close the function button panel.
For more information, see PCM600 documentation.
© Copyright 2013 ABB. All rights reserved
or .
Section 5
Using the HMI
.
GUID-92DE8931-3340-4838-BC8D-33FDF08CD4D4 v3
49