Using Server Administrator Diagnostics; System Diagnostics Features; When To Use The System Diagnostics; Running The System Diagnostics - Dell PowerEdge 700 Installation And Troubleshooting Manual

Back to Contents Page
Running System Diagnostics
Dell™ PowerEdge™ 700 Systems Installation and Troubleshooting Guide
Using Server Administrator Diagnostics
System Diagnostics Features
When to Use the System Diagnostics
Running the System Diagnostics
System Diagnostics Testing Options
Using the Advanced Testing Options
Error Messages
If you experience a problem with your system, run the diagnostics before calling for technical assistance. The purpose of the diagnostics is to test your
system's hardware without requiring additional equipment or risking data loss. If you are unable to fix the problem yourself, service and support personnel can
use diagnostics test results to help you solve the problem.

Using Server Administrator Diagnostics

To assess a system problem, first use the online Server Administrator diagnostics. If you are unable to identify the problem, then use the system diagnostics.
To access the online diagnostics, log into the Server Administrator home page, and then click the Diagnostics tab. For information about using diagnostics, see
the online help. For additional information, see the Server Administrator User's Guide.

System Diagnostics Features

The system diagnostics provides a series of menus and options for particular device groups or devices. The system diagnostics menus and options allow you
to:
Run tests individually or collectively.
l
Control the sequence of tests.
l
Repeat tests.
l
Display, print, or save test results.
l
Temporarily suspend testing if an error is detected or terminate testing when a user-defined error limit is reached.
l
View help messages that briefly describe each test and its parameters.
l
View status messages that inform you if tests are completed successfully.
l
View error messages that inform you of problems encountered during testing.
l

When to Use the System Diagnostics

If a major component or device in the system does not operate properly, component failure may be indicated. As long as the processor and the system's
input/output devices (monitor, keyboard, and diskette drive) are functioning, you can use the system diagnostics to help identify the problem.

Running the System Diagnostics

The system diagnostics can be run either from the utility partition on your hard drive or from a set of diskettes that you create using the Dell OpenManage
Server Assistant CD.