System Diagrams - Raven Hawkeye Installation Manual

For agco rogator rg900; agco rogator rg1100; agco rogator rg1300

Hide thumbs Also See for Hawkeye:

Table of Contents

FIGURE 3. Hawkeye Power Connection (No Injection)

AMI Fuse

Power

Connections

NOTE:

If the system will include Sidekick Pro™ ICD injection, a secondary fuse panel is required. The injection

pumps and Hawkeye

Installation" section on page 37 for additional information.

3. Connect one the M8 x 1.25 output studs to the power supply.

4. Connect the ground wire to the ground stud located on the bottom side of the rear catwalk.

FIGURE 4. Ground Connection

SYSTEM DIAGRAMS

Diagrams start on the next page.

P/N 016-0171-655 Rev. D

will be powered via the secondary fuse panel. Refer to "Sidekick Pro™ ICD

CHASSIS CABLE INSTALLATION

Ground

Connection

Table of Contents