Table of Contents
Advertisement
Parts and their functions
Memory/wipe pattern/number key area
9 Number keys
When the following buttons are pressed and lit, they serve
as buttons for executing their corresponding functions.
BKGD, KEY pattern selector
buttons
Memory operation buttons
Video memory operation button
BKGD, KEY pattern selector buttons
[BKGD PATT], [KEY PATT]
When the [BKGD PATT] button is pressed and lit, the wipe
patterns for the background transitions can be selected
using the number keys.
When the [KEY PATT] button is pressed and lit, the wipe
patterns for the key transitions can be selected using the
number keys.
When both the [BKGD PATT] and [KEY PATT] buttons are
lit, the pattern selection menu is displayed on the built-in
display.
When the [F1] () is rotated, the pattern page is changed.
Refer to "Wipe".
SHOT
7
8
STORE
MEM
NEW
COPY
STILL 1
STILL 2
EVENT
RE
4
5
MEM
CALL
INS
DEL
CLIP 1
CLIP 2
TRIM OUT
1
2
MACRO
DEL
<
>
<
>
CAM
0/10
.
EDIT
PMEM
<<
>>
<<
>>
TRIM OFF
MEMORY / WIPE PATTERN / 10 KEY
[BKGD PATT]
[KEY PATT]
[SHOT MEM]
[EVENT MEM]
[MACRO]
[CAM PMEM]
[VMEM]
19
9
XPT
BKGD
PASTE
DSBL
PATT
TRIM IN
REC
-/+
KEY
6
PAGE
PATT
MOD
STOP
3
VMEM
REV
REV
TAKE
ENTER
C
CAM
CONT
UNDO
PLAY
Memory operation buttons
[SHOT MEM], [EVENT MEM], [MACRO], [CAM PMEM]:
These buttons are used to select the memory type.
The number keys (1 to 10) are used to carry out
operations and register and call settings.
[STORE]:
Press this to register data in the memory.
[RECALL]:
Press this to recall data from the memory.
[DEL]:
Press this to delete data in the memory.
[EDIT]:
Press this to edit the event memory/macro memory.
Refer to "Memory".
Video memory operation button [VMEM]
When the [VMEM] button is pressed and lit, video memory
operations such as recording and playback can be
performed using the number keys.
Refer to "Video memories".
Camera control button [CAM CONT]
Controls connected remote cameras.
The positioner () and display mode buttons () are used
to control.
Advertisement
Table of Contents
